Working on stained glass

Maybe you are frustrated let alone for the first time to create pieces such as stained glass. Some pieces may be an useless piece before you get the best results.
It is very unusual if you fail in your first product. To create high quality stained glass that you must always perform repetitive exercises so that you will get quality results.

One best way that you have to do is get the memo from the glass shop before you do the job. Some stores even provide free stained glass for you to test before you actually start the job.

Cut stained glass with as precise as possible is your training you need to master. With the cuts as accurately as possible will saves material and of course to fit the size you want. You can save a lot of the size of the glass by cutting with the right size so much that you keep the glass material for the next exercise.

Then all you have mastered the next is to use pliers grozier. Hold the pliers grozier is also very important because it will determine the precision with your work. You will be very satisfied with your work when you master it well using pliers.

Do not forget when working with glass for the use of safety equipment. Usually when working with glass is very likely you have an injury. If you are working and there was an accident you will be very annoying.
You also have to protect your eyes because of shattered glass flying resulting in serious injury to you. All parts of your body should be well protected. Congratulations to work with glass.