Tempered Glass

Glass caused by the heating process 700 oC, then cooled abruptly by spraying water vapor. The advantages of this type of glass situated on the strength of the collision.
Previously, such a process has been performed by humans with a more modest scope that is by boiling the glass into the boiling water and immediately cooled. It is intended that the glass is more resistant to heat.

Tempered glass type known as a fix because after the process of tempering glass, this glass could not be further processed such as the bevel, the cutting of holes in glass. When done, the glass will still be destroyed. This type of glass commonly used in the canopy, doors, walls, partitions, floors and car glass.

The use of tempered glass is because of his strength, his strength up to five times that of ordinary glass and does not cause the cutting edges when broken apart so that tempered glass is often also called safety glass.

Tempered glass is widely used on computer screens, skylights, windows doors, bathroom doors.
The car also uses this type of glass for windshields, rear and side.
The uniqueness of this is tempered glass will break if not destroyed at once, there may be a small fraction isolated or crack like this is different from ordinary glass that will break all the glass shattered.

Glass on the car

One important component on the car is glass. This is not just practical, but the glass work for the protection of the driver of a car accident. Glass windows began to be used regularly since 1920 and since then mass produced and widely used, including for automotive.

Safety glass used for cars delivered to the industry for mass-produced using certain guidelines.
Many people do not realize what glass is used, including endurance. Commonly used are glass and laminated glass tempered.

One benefit Tempered glass is not damaging if broken into pieces that are not sharp. This type of glass is very widely used. In addition, tempered glass is very durable and resistant to various elements. Use of this tempered glass on the car is usually used for car window and the back side.

While laminated glass, although not so dangerous because when a splinter into sharp fragments when crushed. The process of making this type of glass through a process of heat and cold along with the plastic. Plastic function is to hold the glass together and lead to a sharp glass splinters and if the injury can result if destroyed.

If you make improvements to your car you should understand the process of replacement would you do. According to the Association National Glass when the technician to replace the glass must meet the highest standards using the best adhesives such as urethane. The technicians also must have a certificate that will check every passenger vehicles, air bags, and check the adhesive will not be mixed with particles, and ensure clean and prime when they install your new car window.
When finished installing a new window in your car they have to explain how to best care for your car glass, car glass is durable for many years.

Any dirt or particles on the glass no matter how small your car will have the potential to jeopardize your safety. Make sure the glass used in your car meets the standard and the process are the best because your life could depend on it.